Based on the original Dravtech design, the Dlux Big Bore shocks have come a long way.

Sold in sets of 4 shocks

Please understand that the anodizing varies from batch to batch, so the color of the shocks might be slightly different from the pictures above or previous batches that we have sold.

           Short Length

Extended length (eye to eye): 96mm approx. (without internal spacer)

Collapsed length (eye to eye): 73mm approx. (without internal spacer)

Shock Travel: 23mm approx. (without internal spacer)

Internal spacer will reduce the extended length and travel length by the length of the spacer (spacer not included) Team KNK Hardware spacer kits available on this website.

________Short 92mm

Extended length (eye to eye): 92mm approx.

Collapsed length (eye to eye): 71mm approx.

Shock Travel: 21 mm approx.

_______Ultra Short Length

Extended length (eye to eye): 78.5mm approx. (without optional internal spacer)

Collapsed length (eye to eye): 62.75mm approx. (without optional internal spacer)

Shock Travel: 15.75mm approx. (without optional internal spacer)

Internal spacer will reduce the extended length and travel length by the length of the spacer (3 or 6mm)

Includes everything you need:
Rod ends
Caps with rod end mod
Dlux-spec shock body
Springs
No pre load shock cups
O-rings and seals
Titanium shock shafts

**No oil installed or included**

The little O rings supplied are for adjusting spring pre load....

You will most likely need some small snap ring pliers to assemble these shocks. Channel lock part #927 or even smaller #926 are great, Imperial part #IR-250H are also known good pliers.