Our Pro Series HiRam Intercooler are the absolute best of the best when it comes to intake mounted intercoolers. We have combined everything that we've learned regarding intake intercoolers over the last few years into one badass unit. This intercooler is based on a proprietary bespoke Garrett Motorsports intercooler core to efficiently support an unheard of 2300hp rating all while maintaining the same basic dimensions as our standard 1800hp HiRam intercoolers.   Like our ULP this intercooler features a 44deg entry angle to give ample hood clearance up front and is perfect for those vehicles that need to sneak the charge plumbing into a tight spot between the engine and radiator.

 We weld a sheetmetal plenum with integrated throttle body flange onto the topside of the intercooler.  In comparison to the sandwich intercooler with the cast lid this saves 1.7" of vertical height, moves the throttle body back 4" and saves inches of room on backside of the cowl area. The CNC'd 105mm throttle body flange features an internal bellmouth and has both Ford and LS bolt patterns!

Overall height from the lower intake manifold mating surface to the top of the throttle body flange is 7.125"!

Note!! If you are using this intercooler with a HiRam manifold with the OLD bolt pattern you will need to order our Retrofit Parts Kit<click here>!! 

-Garrett Motorsports Core
-Newly designed Billet Aluminum Flange.
-7.125" Overall height.
-16ORB Water Connections.
-O-Ring included to properly seal the lid.
-Stainless Steel hardware.
-Made in the USA!