Aftermarket Radio Installation Factory Amp Integration Wire Harness with RCA Inputs

Used in cars with factory premium Sound Systems to allow you to wire in an aftermarket radio to the stock amp.

If you are installing an aftermarket radio in your car you need this harness. This harness will save you time and aggravation. To use it simply unplug your factory radio from the harness in the dash. On the aftermarket radio wire this in by matching up the colors. Then simply plug the aftermarket radio back in to the factory plug in the vehicle. No cutting wires, if you sell your vehicle simply unplug the aftermarket radio and replug in the factory radio.

Will work with vehicle that have the Factory Mach 460/1000 Premium Systems.

EIA Color Codes:

• Yellow – 12V Constant
• Red – 12V Accessory
• Black - Ground
• Black with White Stripe - Factory Amplifier Ground
• Blue - Power Antenna / Factory Amplifier Remote Turn On
• Blue with White Stripe - Factory Amplifier Remote Turn on
• Orange – Dash Light Dimmer/Illumination
• Orange with White Stripe - Dash Light Dimmer/Illumination
• Brown - Mute / Not Used
• Green – Left Rear Speaker (+)
• Green with Black Stripe Left Rear Speaker (-)
• White – Left Front Speaker (+)
• White with Black Stripe – Left Front Speaker (-)
• Purple – Right Rear Speaker (+)
• Purple with Black Stripe – Right Rear Speaker (-)
• Gray – Right Front Speaker (+)
• Gray with Black Stripe – Right Front Speaker (-)

Vehicle Fitment: Will work with vehicle that have the Factory Mach 460/1000 Premium Systems.

Ford

• Crown Victoria 1998-2002
• E-Series 1998-2008
• Expedition 2003-2006
• Mustang 2001-2004

Lincoln

• Continental 1998-2002