The Simpson Strong-Tie BVLZ brick veneer ledger connector provides a new code-compliant, tested solution for safely adding a deck to an existing house with brick veneer exterior. It attaches a wood ledger to the framing through the veneer. This patent-pending connector kit provides a viable alternative to building a free-standing deck, and it installs without having to remove or replace large sections of brick veneer. This solves the issue of weak or non code-compliant ledger connectors and can be easily installed to eliminate the hassle of removing brick veneer, which impacts the appearance of the structure.
The BVLZ brick veneer ledger connector kit includes a steel ledger plate, a compression strut, installation guide, two 14" Strong-Drive® SDWH Timber-Hex HDG tension screws and six Strong-Drive SD Connector shear screws. It's designed so the two tension screws pass through the mortar into the structural framing, and the compression strut transfers compression forces from the ledger plate to the rim joist. The system enables the ledger to hang freely without bearing on the brick veneer.

The BVLZ-1KT does NOT include the template. If you need the entire kit, check out the BVLZ-4KT. All fasteners supplied with connector, use all specified fasteners.

Key Features:

• Allows for drilling through the mortar joints
• Enables inspection/approval by building departments in a retrofit construction application
• Accommodates a wide range of air gaps and brick sizes
• Minimizes penetrations through existing exterior water barriers

California Residents: WARNING