Dynacon 12"x 9' Portable Incline Parts Conveyor Plastic Cleated Belt DC DrivePlastic conveyor frame with open grid plastic belt. On aluminum adjustable leg supports. NOTE: One of the leg supports is missing a bolt on the bottom. Has locking caster wheels at both ends. Condition & Set Up: In good working condition. Tested. Drive Type: Direct drive. Motor & Gearbox: Motor is missing the tag. Tested with a DC drive controller. We currently don't have one available for this conveyor. Bed Length: 48" Infeed. 50" Incline. 22" Flat
Shopping security
Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols
product description
Why choose thelockerguy wholesale?
Plastic conveyor frame with open grid plastic belt. On aluminum adjustable leg supports. NOTE: One of the leg supports is missing a bolt on the bottom. Has locking caster wheels at both ends.
Condition & Set-Up: In good working condition. Tested.
Drive Type: Direct drive.
Motor & Gearbox: Motor is missing the tag. Tested with a DC drive controller. We currently don't have one available for this conveyor.
Bed Length: 48" Infeed. 50" Incline. 22" Flat discharge.
Frame Width: 14"
Bed Width: 300mm (11.81") Conveyor bed width is just under 12" (300mm)
Belt Width: 12"
Frame Height: 8" Sides
Belt Speed: 1-6 FPM. Speed was tested with a drive that is not included with the conveyor.
Bed Height (From Floor): Infeed 10-1/2" Discharge: 43-1/2" when level. Height can be adjusted a few inches at the front end only.
Belt Surface (Type) and Condition: Intralox type plastic open grid with 2" cleats.
Voltage tested and wired for:: 115V
Overall Length: 108"
Show More
Dynacon 12"x 9' Portable Incline Parts Conveyor Plastic Cleated Belt DC Drive