Angle spacers (1x spacer, 2x screws) for angling the entire extension mount, suitable for Canyon Speedmax SLX / CFR with disc brakes.

The spacers are a product of Radsport Ibert and not an original part of the bicycle manufacturer (Canyon)!

The handlebar and extensions are not included, nor are the height-adjustable spacers. The angle spacer is compatible with the original accessories and is therefore height-adjustable. Scope of delivery: 1x spacer, 2x screws (22mm, 1x 35mm, 2x 40mm).

Angle: 15 degrees (selectable, only one variant included)

Original angle spacer: You can mount the 3.5° or 7° angle spacer (original accessories) on top of the angle spacer. However, this requires the mono riser to be bolted with 1x35mm and 1x40mm (for 7°) and 2x40mm (for 3.5°), instead of 2x22mm.

Reach: The angle spacer increases the reach to the front by 50mm - ie the handlebar is mounted further forward than without the angle spacer.

Stack: When using the 20mm base spacer, at least two additional 5mm spacers, i.e., a total of 30mm, must be installed under the angle spacer to ensure the screws can clamp the spacer without play. For medium and high base spacers, mounting the angle spacer directly on the base spacer is sufficient.

Material: Aluminum 7075 black anodized

Please note : Intensive and frequent indoor training on a roller trainer often leads to significant sweat loss. Not only steel parts and ball bearings, but also aluminum can corrode if sweat and salt water are not washed off after use. If the bike is not properly cleaned after use, this same corrosion can occur on both the angle spacers and the original bike parts! Proper cleaning after training is necessary to ensure the durability of the products!