Black Metallic RK100 Raku, Fired

Gorgeous Iridescent & Metallic Effects!

Black Metallic creates a highly reflective, dark metallic finish following a proper Raku Firing. Due to the unpredictable nature of this firing technique, results will vary with every firing.

Mayco Raku Glaze

Mayco Raku glazes are designed to develop beautiful metallic lusters and crackle patterns when fired according to raku firing processes. From 16th century firing methods in Japan to 20th century reduction methods of the West, Raku firing always reveals exciting and dramatic results.

Glazes designed for the mysterious raku process using combustibles and varying firing methods to produce unique finishes. There are several methods and many nuances to raku firing – for our purposes here we define raku firing broadly as the processes of firing an earthenware body and glaze in a kiln, removing the ware from the kiln after it has reached proper temperature, placing it in a container of combustible material and enclosing the container to reduce the oxygen in the container.

General Use

• Shake for 5-6 seconds before use. Stir well.
• Apply 3 coats to bisqueware. Use of a thermal shock-resistant raku clay body will help reduce the incidence of cracking. Do not glaze inside or bottom of ware. Thinner coats tend to produce greater metallic effects. If you are not getting the desired metallic results you can adjust your glaze application.
• Allow to dry thoroughly.
• Fire to cone 06 (1850°F, 1010°C) and hold for 5 minutes.
• Remove ware from kiln with tongs. If using an electric kiln make sure power is off and allow to cool.
• Minimizing the distance between the kiln and the reduction container can improve the development of metallic colors.
• Place ware into metal lidded container with combustible materials. Place lid on immediately to reduce oxygen. The combustible materials will produce flames and smoke. Leave in container until cool, approximately 20 minutes and remove.
• After ware has completely cooled use water and a scouring pad to clean; cleaning will improve the luster and colors in the fired finish.
• Actual fired results will vary according to choice of clay.

Safety Note

• Proper safety processes and personal protective equipment are very important when doing Raku as you are exposed to high heat, flames and smoke.
• Always wear fire protective clothing, fireproof gloves and protective eyewear.
• Do not open or insert tongs into an electric kiln without shutting off.
• Reduction process should take place outside of building due to flames and smoke.
• Do not spray apply glazes without a NIOSH approved respirator and other personal protective equipment.
• Non-Toxic and Non-Hazardous when used according to manufacturer’s directions. Not recommended for food surfaces.